The CUBRO Packetmaster combines up to 24 x 10/100/1000 ports
and 2 x 10Gbit ports with the most powerful network process
engine available on the market. This unit can handle up to
30Gbit IP Traffic per second. Basically the Packetmaster is a
Test Access Port (TAP) but can do a lot more and is a high
performance multipurpose IP traffic handling engine. It can
also be used as router, switch, cross connect, aggregator,
filter, load balancer .. |
|

Packetmaster 30 Gbit Appliance
Packetmaster Datasheet
Packetmaster 2 Datasheet
Aggragation Appliance
Filter Application |
Link/Port Aggregation
Aggregation
of up to 24 Ports or 12 links to a single or multiple output
ports.
Filter
Filters traffic by
IP address, port number and physical input port.
Load balancing
Load balances
traffic by IP address, port number and physical input port.
Duplicated traffic remover
This
function fully automatically removes duplicated packets. This
function is extremely important when monitoring multiple links
and entities where the same traffic is usually captured more
than once.
10G traffic demultiplexer
If
highly loaded 10G links have to be monitored the traffic can
be easily demultiplexed into 24 low traffic Gbit links.
Flexible unit combination
Various
units can be connected together – e.g. 240 input ports
monitored at 24 output ports is straight forward and easy.
Cross connect function
Packetmaster
can work as layer 3 cross connect plus aggregator and filter. |
|
Jumbo Frame Support
The
Packetmaster supports jumbo Ethernet frames with a size of up
to 9000 Bytes – this feature is supported in all
applications
Modular software concept and easy upgrade
capabilties
Because of its open
hardware and its flexible and modular software concept the
Packetmaster can grow with customers requirements.
SFP and XFP Modules
For a
maximum of flexibility the Packetmaster is designed to run
with any kind of SFP and XFP
Rugged 19” Housing
The
Packetmaster is delivered in a ruggedized 19” 1U housing
with precise connector labeling on the front panel.
Different Power Versions
48
VDC or 230 VAC in dual and single power supply versions
available.
Management
Management is
possible over RS232 and Ethernet. Moreover a special option
for in-band management is also available.
Easy use and operation
For
straight-forward operation and supervision the Packetmaster
supports SNMP and CLI. |
The CUBRO Packetmaster 2 combines up to 34 x 10/100/1000 and 2 x
10Gbit or 10 x 10Gbit ports and 2 x 1Gbit ports in any
combination with the most powerful network process engine
available on the market. This unit can handle up to 100Gbit IP
Traffic per second. Basically the Packetmaster is a Test Access
Port (TAP) but can do a lot more and is a high performance
multipurpose IP traffic handling engine. It can also be used as
router, switch, cross connect, aggregator, filter, load balancer
.. |
Link/Port Aggregation
Aggregation
of up to 34 ports or 16 links to a single or multiple
output ports.
Filter
Filters traffic by
IP address, port number and physical input port. As advanced
option we offer the unique payload filtering „fingerprint
filter“
Load balancing
Load balances
traffic by IP address, port number and physical input port.
Duplicated traffic remover
This
function fully automatically removes duplicated packets. This
function is extremely important when monitoring multiple links
and entities where the same traffic is usually captured more
than once.
10G traffic demultiplexer
If
highly loaded 10Gbit links have to be monitored the traffic
can be easily demultiplexed into 24 low traffic Gbit links.
Flexible unit combination
Various
units can be connected together – e.g. 240 input ports
monitored at 24 output ports is straight forward and easy.
Cross connect function
Packetmaster
can work as layer 3 cross connect plus aggregator and filter. |
|
Jumbo Frame Support
The
Packetmaster supports jumbo Ethernet frames with a size of up
to 9000 Bytes – this feature is supported in all
applications
Modular software concept and easy upgrade
capabilties
Because of its open
hardware and its flexible and modular software concept the
Packetmaster can grow with customers requirements.
SFP and SFP+ Modules
For
a maximum of flexibility the Packetmaster is designed to run
with any kind of SFP and SFP+
Rugged 19” Housing
The
Packetmaster is delivered in a ruggedized 19” 1U housing
with precise connector labeling on the front panel.
Different Power Versions
48
VDC or 230 VAC in dual and single power supply versions
available.
Management
Management is
possible over RS232 and Ethernet. Moreover a special option
for in-band management is also available.
Easy use and operation
For
straight-forward operation and supervision the Packetmaster
supports SNMP and CLI. |
The Packetmaster EX product series has been developed to preaggregate
low and medium loaded 10G links to save ports on
expensive 10G traffic Analyzers and Capture tools. Alternatively
the appliances can be used to automatically switch heavily loaded
10G links between different Analyser- and/or Capture ports.
Once wired, any tool connected to the Packetmaster EX can access
any datalink tapped or spanned into the appliance. An intuitive,
very easy to use Command Line Interface allows connecting ports
to each other in seconds. Changing the setup of the appliance does
not influence ports not being part of the change. Each port automatically
becomes a 1G or 10G port depending on the SFP(+) used.
PDF Datasheet
more Cubro products..
|
|
Applications:
Link / Port Aggregation
Aggregates up to 46 10G ports to
one single output port. Multiple Aggregation
pipes are available.
Transparent Switching
The EX48 can be used as a fully
transparent Any to Any and Many to
Any Layer1 switch matrix.
Filtering
The appliance can handle more than
1.000 filters at the same time at line
rate. Any filter can either drop or
move any packet.
Media conversion
All ports are SFP+ based enabling
easy media conversion between single
and multi mode applications as
well as any optical wavelength. |